Guide · Machining
Choosing a cutting fluid for aluminium.
Stain, built-up edge or foam can have several causes. Review the alloy, fluid, equipment and process together.

Separate the complaints
Distinguish staining after storage from a poor surface at the machine. Depending on the process, the alloy, water and time a part sits wet may matter; review tooling and operating conditions as well as the fluid.
What to write in the enquiry
- The alloy, not just “aluminium”. Wrought 6061 and a high-silicon die-casting alloy such as ADC12 may have different fluid requirements.
- Milling, turning, drilling or grinding, and whether coolant is through the tool.
- The water: hard, soft, or deionized. Water and concentrate can both affect foam and residue.
- Whether parts are washed the same day, or racked wet over a weekend.
Where the numbers come from
Confirm the concentration and refractometer factor for the selected grade from its available technical data or supplier. Review compatibility for the actual alloy and process.
