Choose the finish and supporting coats together
Substrate preparation, primer, intermediate coat, finish and application conditions form one coating system. Selecting a topcoat by finish alone does not confirm compatibility with the layers underneath it.
FEVE solid-colour topcoatAn ambient-curing FEVE fluorocarbon solid-colour topcoat for protective coating systems on steel structures.
Match the substrate preparation, compatible primer and intermediate coat, finish colour and application conditions as one coating system.
FEVE metallic topcoatAn ambient-curing FEVE fluorocarbon metallic-effect topcoat for protective coating systems, with its own finish-specific technical data.
Review the metallic appearance, compatible supporting coats, application equipment and required coating build together.
FEVE clearcoatAn ambient-curing FEVE fluorocarbon clear finish for a compatible protective coating system.
Select around the underlying coating, required appearance, service exposure and the application and curing schedule.
Read each finish's own data
Solid-colour, metallic and clear finishes retain their own technical values and conditions. Do not replace one finish's schedule with another. Surface-dry and hard-dry references are not a statement of complete cure.
Published system notes
- Reference film data use a three-layer system: primer / intermediate / topcoat.
- Film-property results relate to the stated system. Film thickness, substrate preparation and complete conditioning details are defined for the project.
- Surface-dry and hard-dry times are not full chemical-cure or return-to-service times.
- For black, phthalocyanine-green and phthalocyanine-blue single-colour topcoats, the reference minimum solids content is ≥30%. Agree a shade-specific solids target for blends using these colours.
Reference steel coating build: Epoxy zinc-rich primer + ambient-curing fluorocarbon topcoat; or epoxy zinc-rich primer + epoxy micaceous iron-oxide intermediate + topcoat, with an optional clearcoat.
Reference wall coating build: Primer + intermediate + ambient-curing fluorocarbon topcoat. Putty may be added or the intermediate coat omitted depending on the actual application.
- Reference film data use a four-layer system: primer / intermediate / metallic topcoat / clearcoat.
- Film-property results relate to the stated system. Film thickness, substrate preparation and complete conditioning details are defined for the project.
- Surface-dry and hard-dry times are not full chemical-cure or return-to-service times.
- For black, phthalocyanine-green and phthalocyanine-blue single-colour topcoats, the reference minimum solids content is ≥30%. Agree a shade-specific solids target for blends using these colours.
Reference steel coating build: Epoxy zinc-rich primer + ambient-curing fluorocarbon topcoat; or epoxy zinc-rich primer + epoxy micaceous iron-oxide intermediate + topcoat, with an optional clearcoat.
Reference wall coating build: Primer + intermediate + ambient-curing fluorocarbon topcoat. Putty may be added or the intermediate coat omitted depending on the actual application.
- Reference film data use a four-layer system: primer / intermediate / solid-colour topcoat / clearcoat. The reference build uses the topcoat described under Linkium SC100.
- Film-property results relate to the stated system. Film thickness, substrate preparation and complete conditioning details are defined for the project.
- Surface-dry and hard-dry times are not full chemical-cure or return-to-service times.
Reference clearcoat placement: Clear finishing layer over a compatible fluorocarbon topcoat system.
Describe the coating line
- Substrate and preparation, plus the existing primer or underlying coat.
- Required solid colour, metallic appearance or clear finish.
- Application method, intended coating build and service exposure.
- Documents and test requirements for the selected coating system.
PVF steel drum lining is a separate application. FEVE topcoat data do not establish an internal-lining or food-contact claim.
Selection guidance based on the published Linkium catalogue. Confirm the selected-grade specification and applicable safety documents for your intended use.