Guide · Industrial cleaners
Match the wash to the workpiece.
Compare immersion, ultrasonic and spray cleaning using the published process references.

Three questions before choosing a cleaner
- What is being cleaned? Give the alloy, finish, assembly and any sensitive surfaces.
- What must be removed? Describe oil, machining fluid, fines or other soil, including what is used earlier in the line.
- How is the part washed? Identify immersion, ultrasonic or spray equipment and the temperature, cycle and rinse steps available.
Scroll horizontally to see all process conditions
| Reference | Cleaning method | Bath temperature | Contact time |
|---|---|---|---|
| CL100 | Immersion or ultrasonic | Ambient to 80 °C | 2-8 min |
| CL120 | Immersion or spray | Ambient to 80 °C | 1-3 min |
| CL130 | Ultrasonic | Ambient to 60 °C | 1-3 min |
| CL131 | Spray | 55-60 °C | 1-3 min |
| CL150 | Immersion or ultrasonic | Ambient to 60 °C | 10-30 min |
| CL160 | Immersion or ultrasonic | Ambient to 60 °C | 1-3 min |
Keep ultrasonic and spray requirements distinct
Ultrasonic equipment and spray equipment expose the workpiece in different ways. A published cycle does not establish the dilution, pH or compatibility for every alloy or assembly. Review these points for the selected cleaner and actual equipment.
Review the ultrasonic reference · Review the aluminium spray reference
Include the next operation
Tell us whether the part moves to inspection, assembly or surface finishing, how it is rinsed and dried, and how long it waits. These details define what a useful cleaning review needs to cover.
Selection guidance based on the published Linkium catalogue. Confirm the selected-grade specification and applicable safety documents for your intended use.
