Guide · Silicone materials
Read the viscosity unit before comparing.
Use the stated cP or mm²/s value and its test temperature when selecting silicone fluids.

Keep the unit and condition together
Dynamic viscosity is reported here in cP; kinematic viscosity may be reported in mm²/s. Copy the unit and measurement temperature along with the value. Do not substitute cSt for cP when matching a reference.
| Reference | Dynamic viscosity |
|---|---|
| SM302 | 5 cP |
| SM303 | 6 cP |
| SM304 | 7 cP |
| SM305 | 10 cP |
| SM306 | 20 cP |
| SM307 | 50 cP |
| SM308 | 100 cP |
Select a grade within a series
SM310 lists 5-100000 mm²/s as a family range. A series range is not a grade schedule. Specify the target viscosity, test temperature and vinyl-content requirement to review the actual material.
SM321 has its own published series data. Do not assign a separate flash-point range to individual viscosity grades without a confirmed schedule.
What makes a comparison useful
- Use the same viscosity type, unit, temperature and method.
- Review functionality and compatibility with the curing system.
- Carry the selected-grade limits into the quotation rather than assuming family endpoints are supply limits.
Selection guidance based on the published Linkium catalogue. Confirm the selected-grade specification and applicable safety documents for your intended use.
