Guide · Fasteners

Die galling in stainless cold heading.

Wire pickup on a die can involve the lubricant, tooling or wire surface. Review the process before selecting a change.

Steel bolts, nuts and washers on an inspection tray

Factors to investigate

  • Lubrication. Check whether the existing lubricant and its application suit the forming loads and process.
  • The die. Inspect the die surface, coating, radius and tooling condition.
  • The wire. Check the wire grade and surface coating, including compatibility with the lubricant used for heading.

What to send

Wire grade, number of blows, parts per minute, a photo of the pickup on the die, and the oil name you use today can help the review. Note any differences observed with other wire grades on the same machine.

Review a proposed change against the actual tooling and process. Confirm trial conditions separately for the material under consideration.

Ask about your process

Linkium assistantAI assistant · Product information

Hi, I am Linkium's AI assistant. Tell me your application, product or chemical specification and I can help you find relevant product information. To request a response from our team, use the contact form or WhatsApp. Prices, lead times and payment terms come from a person.

Messages are stored and sent to our AI provider. Avoid sensitive information. Privacy notice.

Prefer another channel? Email our team or use WhatsApp below.

Continue on WhatsApp